Welding a new driveway gate
We measure the opening, cut the frame to length, weld the hinges and latch plate, and hang the gate so it swings level and clears the ground. Then we grind the welds and prime the bare metal.
Service area
Metal Warriors Welding and Fabricating in New Port Richey
We serve New Port Richey, just a short drive north of Holiday. Residents there often call us for trailer repairs, custom gates, and structural welding. Whether you need a new railing or a cracked frame fixed, we'll come to you.
4.4 stars on Google
From 54 Google reviews.
Local, and close by
Covering Holiday, FL and the surrounding Tampa Bay area.
Free estimates
Tell us what needs doing and we will come out and take a look.
Local service
Proudly serving New Port Richey
New Port Richey stretches along the Pithlachascotee River and inland through a mix of older ranch-style homes, newer subdivisions, and mobile home parks. The heat and humidity here are intense, and the sandy soil shifts with seasonal rains, so anything welded outdoors has to hold up against corrosion and ground movement. Gates, railings, and trailer frames take a beating from the salt air blowing in from the Gulf, and the spread-out layout means most work is at individual homes rather than in a dense commercial core.
Our crew loads the truck each morning with the welder, gas bottles, grinders, and materials we expect to need for the day's jobs. We drive to the property, set up in the driveway or yard, and work on site, no dragging trailers or gates back to a shop. We lay down drop cloths and tarps to catch sparks and metal dust, and we sweep up before we leave. Being based just south in Holiday means we can get to most New Port Richey addresses in under 20 minutes, so we can handle same-week calls without a long wait.
Metal Warriors Welding and Fabricating works across Holiday, FL and the surrounding Tampa Bay area, so a crew is never far from New Port Richey. Call (727) 336-6681 or request a free estimate and we’ll come out and take a look.
Local demand
What New Port Richey homeowners call us for
Trailer and gate repair
Salt air and sandy roads corrode trailer frames and gate hinges fast. We cut out rusted sections, weld in new steel, and reinforce the weak points so the repair outlasts the original.
Custom gates
Many homes here sit on wide lots with driveways that need a sturdy gate. We build and hang steel or aluminum gates that fit the opening, clear the ground, and swing true year after year.
Structural welding
Carports, patio covers, and metal roof supports need welds that handle wind loads and the weight of Florida sun. We weld beams and brackets in place, matching the existing structure's strength.
Repair welding
Lawn equipment frames, boat trailer tongues, and wrought-iron railings crack from use and rust. We clean the break, weld it back, and grind the bead smooth so it looks like it never happened.
Typical projects
The kind of work we take on in New Port Richey
Repairing a boat trailer frame
We cut out the cracked or rusted section, fit a new piece of steel, weld it in with full-penetration beads, and coat the repair with rust-inhibiting primer. The trailer goes back to service the same day.
Reinforcing a carport beam
We brace the beam with a steel channel welded to the post and rafter, then grind the welds flush and paint the repair to match. The structure gains the stiffness it needs to resist wind uplift.
What we do here
Every service, available in New Port Richey
Where we work
Across New Port Richey
The River Road corridor
Homes along the Pithlachascotee River need aluminum railings and boat trailer repairs that resist freshwater and salt spray. We work on dockside gates and metal staircases that lead down to the water.
Old New Port Richey
The older neighborhoods near Main Street have historic houses with custom ironwork and steel porch supports. We match existing weld patterns and profiles so the repair blends with the original craftsmanship.
Outlying acreage
Properties on the edges of town have large driveways, farm gates, and equipment trailers. We weld heavy-duty hinges and frame reinforcements that stand up to gravel roads and frequent opening and closing.
Before work starts
Permits & local rules in New Port Richey
Structural welding permits
Structural work on carports, patio covers, and load-bearing beams usually requires a permit from Pasco County. The customer should check with the county building department before we start, and we can provide the weld details they need for the application.
Gate and fence permits
Gates over a certain height or that attach to a structure may need a permit from the city or county. The homeowner should confirm the setback from the property line and any HOA rules before we order materials.
Questions
New Port Richey questions, answered
Reviews
What Holiday homeowners say
4.4 average from 54 Google reviews
“When visiting my parents and working on a small project that needed a small weld in it, we called them and went straight over and they immediately fixed the piece we needed welded! EVEN BETTER, the owner used to live 30 minutes from us here in Southern Ohio! We visited for a bit and the service was top notch!! Glad we found them - HIGHLY RECOMMENDED!!!”
Angie Copas
Google Review
“Kevin does great work. He replaced my torn up RV roof and turned it into a party deck. He also made a gorgeous aluminum balcony.”
John Stillings
Google Review
“Brought Kevin a boat trailer repair that had me stumped. I wasn't sure it could even be done but he looked it over, got to work, and was finished in like 2 seconds. The weld was clean, the repair was solid, and he made something genuinely tricky look completely routine. That's the kind of skill you can't fake. Metal Warriors is the real deal.”
Robert Antognoni
Google Review
“Highly recommend Metal Warriors Welding. I contacted Kevin with an emergency during the afternoon. I needed some work done on my motorcycle so I can ride the next day. He was extremely busy with other jobs and still made the time to take care of me that same night. That kind of service you won't receive anywhere else. He was friendly, helpful, reliable, and funny.”
Eric Ramirez
Google Review
Get in touch for a free estimate
Tell us about your project and we'll get back to you with a quote. Or just give us a call.