Service area

Metal Warriors Welding and Fabricating in Port Richey

Port Richey is just up the road from us. We do a lot of trailer and gate repair for folks in this area. If you need a quick fix or a custom build, we're close by and happy to help.

4.4 stars on Google

From 54 Google reviews.

Local, and close by

Covering Holiday, FL and the surrounding Tampa Bay area.

Free estimates

Tell us what needs doing and we will come out and take a look.

Local service

Proudly serving Port Richey

Port Richey sits right on the Gulf, with a mix of older mobile home parks, ranch-style houses, and newer subdivisions on canals. The salt air and humidity are hard on anything metal, so welding repairs here are a regular need, gates, trailer hitches, railings, and structural supports. The ground is sandy and often low-lying, so anything we set in the ground has to be anchored properly to handle the soft soil and the occasional flood.

We're just down the road in Holiday, so Port Richey is practically our backyard. Our crew loads up the truck and comes to you, whether that's a mobile home on a narrow lot or a house on a canal. We work around your schedule, keep the job site clean, and make sure you know what we're doing and why. Being local means we also know the common problem spots, rust at the base of a post, a gate that drags because the ground settled.

Metal Warriors Welding and Fabricating works across Holiday, FL and the surrounding Tampa Bay area, so a crew is never far from Port Richey. Call (727) 336-6681 or request a free estimate and we’ll come out and take a look.

Local demand

What Port Richey homeowners call us for

Trailer and hitch repair

With the fishing and boating around Port Richey, trailers take a beating from salt water and rough ramps. We weld cracked frames, replace worn hitches, and reinforce weak spots so your trailer is safe to tow.

Gate repair and fabrication

Driveway gates in Port Richey face constant salt air and sometimes storm surge. We repair sagging hinges, broken welds, and rusted panels, or build a new gate that fits your opening and your style.

RV deck and balcony welding

Many Port Richey residents keep an RV or a boat on the property. We build custom decks that match the height of the vehicle, and we repair or replace balcony railings that have corroded in the coastal air.

Structural welding for older homes

Older homes here often have steel beams or supports that have rusted or cracked over time. We weld in reinforcement and repair connections to keep the structure sound, especially in the older neighborhoods.

Typical projects

The kind of work we take on in Port Richey

Welding a cracked trailer frame, Port Richey

Welding a cracked trailer frame

We inspect the frame, find the crack, and weld it up with proper penetration. We also check for other weak spots and reinforce them so the trailer doesn't break again on the road.

Repairing a sagging gate, Port Richey

Repairing a sagging gate

We take the gate off its hinges, weld in new bracing, and rehang it so it swings level. We also replace worn hinge pins and adjust the latch so it catches every time.

Building a new RV deck, Port Richey

Building a new RV deck

We fabricate a platform that matches the height of your RV's door. We set posts in concrete, weld the frame, and install decking that can handle the weight and the weather.

Where we work

Across Port Richey

Downtown Port Richey

Older homes on small lots, some with metal carports or sheds. We do a lot of gate repairs and structural welding on these properties, often working in tight spaces between houses.

The Highlands

This area has more spread-out properties, some with acreage. We build RV decks, repair trailers, and weld gates for the bigger driveways. The sandy soil means we take extra care setting posts.

Canal-front neighborhoods

Homes along the canals deal with salt spray and high humidity. We repair boat lift frames, dock railings, and any metal structure that's exposed to the water. We use materials that hold up to the marine environment.

Before work starts

Permits & local rules in Port Richey

Pasco County building department

For structural work like a new deck or a balcony repair, Pasco County may require a permit. It's best to check with the county's building department before you schedule, so you know what's needed.

Flood zone considerations

If your property is in a flood zone, there may be elevation requirements for any new structure. The county can tell you what applies to your lot, and we can build to meet those rules.

Questions

Port Richey questions, answered

Reviews

What Holiday homeowners say

4.4 average from 54 Google reviews

When visiting my parents and working on a small project that needed a small weld in it, we called them and went straight over and they immediately fixed the piece we needed welded! EVEN BETTER, the owner used to live 30 minutes from us here in Southern Ohio! We visited for a bit and the service was top notch!! Glad we found them - HIGHLY RECOMMENDED!!!
Angie Copas
Google Review
Kevin does great work. He replaced my torn up RV roof and turned it into a party deck. He also made a gorgeous aluminum balcony.
John Stillings
Google Review
Brought Kevin a boat trailer repair that had me stumped. I wasn't sure it could even be done but he looked it over, got to work, and was finished in like 2 seconds. The weld was clean, the repair was solid, and he made something genuinely tricky look completely routine. That's the kind of skill you can't fake. Metal Warriors is the real deal.
Robert Antognoni
Google Review
Highly recommend Metal Warriors Welding. I contacted Kevin with an emergency during the afternoon. I needed some work done on my motorcycle so I can ride the next day. He was extremely busy with other jobs and still made the time to take care of me that same night. That kind of service you won't receive anywhere else. He was friendly, helpful, reliable, and funny.
Eric Ramirez
Google Review

Get in touch for a free estimate

Tell us about your project and we'll get back to you with a quote. Or just give us a call.

CallFree estimate